Definitive Technology UIW RCS II UIW RCSII Manual - Page 10

14-1/2" MINIMUM CAVITY SIZE BETWEEN STUDS HOLDING WOODSCREWS EXISTING CROSSBEAM CAUSING OBSTRUCTION EXISTING CEILING JOISTS 16" ON-CENTER WOODSCREW (6 PLACES) LOCK ARM (2 PLACES) 14-3/8" TEMPLATE CUT-OUT 14-3/8" TEMPLATE CUT-OUT 15-3/8" MINIMUM CAVITY SIZE REQUIRED BETWEEN CROSSBRACES TO CLEAR LOCK ARMS. UNIT MUST BE PLACED AGAINST CROSSBEAM. 1-1/4" MINIMUM CLEARANCE REQUIRED FOR LOCKARMS Diagram 3 Troubleshooting Your UIW RCS II Speakers If you experience any difficulties with your UIW RCS II Loudspeakers, try the suggestions described below. If you are still having problems, please consult your Definitive Technology authorized dealer for assistance. • Make sure all your system interconnections and power cords are solidly in their place. • Check to be sure that the power cords and/or speaker wires have not been damaged. • Many amplifier/receivers have sophisticated internal protection circuitry. If for some reason the protection circuitry is tripped, please turn down the system's volume and wait five minutes before trying the system again. 10