Dell 1210S User Guide - Page 37
Dell 1210S - DLP Projector - 2500 ANSI Lumens Manual
UPC - 335512103353
View all Dell 1210S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
MENU TRANSPARENCY-Select to change the transparency level of the OSD background. MENU TIMEOUT-Allows you to adjust the time for an OSD timeout. By default, the OSD disappears after 20 seconds of non-activity. MENU LOCK-Select On to enable Menu Lock and hide the OSD menu. Select OFF to disable the Menu Lock. If you want to disable the Menu Lock function and have the OSD disappear, press the Menu button on the control panel or remote control for 15 seconds, then disable the function. AUDIO SETTINGS-Select and press to change audio settings. The audio settings menu consists of the following options: VOLUME-Press to decrease the volume and to increase the volume. SPEAKER-Select On to enable speaker. Select Off to disable speaker. MUTE-Allows you to mute the sounds for audio input and audio output. POWER SETTINGS-Select and press to activate power settings. The power settings menu consists of the following options: POWER SAVING-Select Off to disable Power Saving mode. By default, the projector is set to enter power saving mode after 120 minutes of no activity. A warning message appears on screen showing a 60-second countdown before switching to power saving mode. Press any key buttons during countdown period to stop power saving mode. You can also set a different delay period to enter power saving mode. The delay period is the time you want the projector to wait without an input signal. Power saving can be set to 30, 60, 90, or 120 minutes. Using Your Projector 37