Dell 1800MP Owner's Manual - Page 18

2 TEMP warning light 3 Source 4 Keystone adjustment 5 Resync 6 Menu 7 and buttons 8 Enter 9 Keystone adjustment 10 Up and Down 11 LAMP warning light • A solid orange TEMP light indicates that the projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell. • A blinking orange TEMP light indicates that a projector fan has failed and the projector automatically shuts down. If the problem persists, contact Dell. Press to toggle through Analog RGB, Composite, Component-i, S-video, and Analog YPbPr sources when multiple sources are connected to the projector. Press to adjust image distortion caused by tilting the projector. (±15 degrees) Press to synchronize the projector to the input source. Resync does not operate if the on-screen display (OSD) is displayed. Press to activate the OSD. Use the directional keys and Menu button to navigate through the OSD. Press to adjust the OSD setting. Press to confirm the selection item. Press to adjust image distortion caused by tilting the projector. (±15 degrees) Press to select the OSD items. If the LAMP light is solid orange, replace the lamp. If the LAMP light is blinking orange, the system has failed and the projector will automatically shut down. If this problem persists, contact Dell. 18 Using Your Projector