Dell 4610X Wireless User's Guide - Page 46
B, Audio-c, And Hdmi., Audio Settings Audio Input Volume Speaker Mute Power Settings Power Saving
View all Dell 4610X Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
AUDIO SETTINGS-Select and press to change audio settings. The audio settings menu consists of the following options: AUDIO INPUT-Select the Audio input source, options are: Audio-A, AudioB, Audio-C, and HDMI. VOLUME-Press to decrease the volume and to increase the volume. SPEAKER-Select On to enable speaker. Select Off to disable speaker. MUTE-Allows you to mute the sounds for audio input and audio output. POWER SETTINGS-Select and press to activate power settings. The power settings menu consists of the following options: POWER SAVING-Select Off to disable Power Saving mode. By default, the projector is set to enter power saving mode after 120 minutes of no activity. A warning message appears on screen showing a 60-second countdown before switching to power saving mode. Press any key buttons during countdown period to stop power saving mode. You can also set a different delay period to enter power saving mode. The delay period is the time you want the projector to wait without an input signal. Power saving can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the delay period, the projector turns off the lamp and goes into power saving mode. If an input signal is detected within the delay period, the projector automatically turns on. If an input signal is not detected within two hours during power saving mode, the projector switches from Power Saving mode to Power Off mode. To turn on the projector press the Power button. 46 Using Your Projector