Dell 4610X Wireless User's Guide - Page 84
Fault - DC, Lamp module
![]() |
View all Dell 4610X Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Lamp failure Fault - DC supply (+12V) Fault - DC supplies (secondary) Lamp module connection failed Lamp is defective. Replace the lamp. Power supply has been interrupted. The projector automatically shuts down. Unplug the power cord after three minutes and then turn on the projector. If this problem persists, contact Dell. Power supply has been interrupted. The projector automatically shuts down. Unplug the power cord after three minutes and then turn on the projector. If this problem persists, contact Dell. Lamp module connection may be disrupted. Check the lamp module and ensure that it is properly installed. If the problem persists, contact Dell. OFF AMBER Flashing AMBER Flashing OFF OFF OFF OFF OFF OFF OFF AMBER OFF AMBER AMBER OFF AMBER OFF OFF OFF AMBER Flashing 84 Troubleshooting Your Projector
![](/manual_guide/products/dell-4610x-wireless-users-guide-4bf57c6/84.png)