Dell 510D Service Manual - Page 7

Internal Card With Bluetooth, Wireless Technology - latitude

Page 7 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ Latitude™ D510 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide. NOTICE: To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. 1. Follow the instructions in "Preparing to Work Inside Your Computer." 2. Remove the hard drive. 3. Turn the computer upside down. 4. Pull the card connector out of the system board connector. 5. Pull the card cable to remove the internal card with Bluetooth wireless technology from the computer. NOTICE: When replacing the internal card with Bluetooth wireless technology, ensure that the card cable is routed correctly so that you do not damage the cable when you install the hard drive. 1 internal card with Bluetooth wireless technology 2 system board connector 3 card connector 4 card cable To replace the internal card with Bluetooth wireless technology: 1. Insert the internal card with Bluetooth wireless technology. 2. Ensure that the card cable is routed under the tab.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Back to Contents Page
Internal Card With Bluetooth
®
Wireless Technology
Dell™ Latitude™ D510 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside Your Computer
."
2.
Remove the
hard drive
.
3.
Turn the computer upside down.
4.
Pull the card connector out of the system board connector.
5.
Pull the card cable to remove the internal card with Bluetooth wireless technology from the computer.
To replace the internal card with Bluetooth wireless technology:
1.
Insert the internal card with Bluetooth wireless technology.
2.
Ensure that the card cable is routed under the tab.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's
electronic components. You can do so by touching an unpainted metal surface.
NOTICE:
When replacing the internal card with Bluetooth wireless technology, ensure that the card cable is routed correctly so that you do not damage
the cable when you install the hard drive.
1
internal card with Bluetooth wireless technology
2
system board connector
3
card connector
4
card cable