Dell Alienware Aurora - R2 Service Manual (English only) - Page 27
Removing the Media Card Reader
View all Dell Alienware Aurora - R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removing the Media Card Reader 2 1. Follow the instructions in "Before You Begin" on page 6. 2. Press the AlienHead on the front of your computer to lower the drive panel. 3. Remove the left side-panel (see "Removing the Left Side-Panel" on page 11). 1 4. Open the PCI shroud (see "Opening the PCI Shroud" on page 18). 5. Disconnect the FlexBay USB cable from the connector on the master I/O board. 6. Lift the securing tab and slide the FlexBay dock out through the front of the computer. CHAPTER 5: DRIVE(S) 3 1 FlexBay USB cable 3 FlexBay dock 2 securing tab 027 /027
027
027
/
CHAPTER 5: DRIVE(S)
3
1
2
1
FlexBay USB cable
2
securing tab
3
FlexBay dock
Removing the Media Card Reader
Follow the instructions in “Before You Begin” on page
1.
6
.
Press the AlienHead on the front of your computer to lower the drive panel.
2.
Remove the left side-panel (see “Removing the Left Side-Panel“ on page
3.
11
).
Open the PCI shroud (see “Opening the PCI Shroud” on page
4.
18
).
Disconnect the FlexBay USB cable from the connector on the master I/O
5.
board.
Lift the securing tab and slide the FlexBay dock out through the front of the
6.
computer.