Dell Alienware Aurora - R2 Service Manual (English only) - Page 45
Replacing the PCI-Fan Assembly
View all Dell Alienware Aurora - R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Replacing the PCI-Fan Assembly 1. Follow the instructions in "Before You Begin" on page 6. 2. Align the PCI-fan assembly with the metal bracket on the chassis. 3. Slide the PCI-fan assembly into the chassis. 4. Connect the PCI-fan assembly cable to the connector on the master I/O board. 5. Replace full-length PCI-Express cards, if any (see "Replacing the PCI-Express Card(s)" on page 33). 6. Replace the drive-bay shroud (see "Replacing the Drive-Bay Shroud" on page 19). 7. Close the PCI shroud (see "Closing the PCI Shroud" on page 18). 8. Replace the left side-panel (see "Replacing the Left Side-Panel" on page 11). 9. Connect your computer and devices to electrical outlets and then turn them on. CHAPTER 8: FANS 045 /045
045
045
/
CHAPTER 8: FANS
Replacing the PCI-Fan Assembly
Follow the instructions in “Before You Begin” on page
1.
6
.
Align the PCI-fan assembly with the metal bracket on the chassis.
2.
Slide the PCI-fan assembly into the chassis.
3.
Connect the PCI-fan assembly cable to the connector on the master
4.
I/O board.
Replace full-length PCI-Express cards, if any (see “Replacing the PCI-Express
5.
Card(s)” on page
33
).
Replace the drive-bay shroud (see “Replacing the Drive-Bay Shroud” on
6.
page
19
).
Close the PCI shroud (see “Closing the PCI Shroud” on page
7.
18
).
Replace the left side-panel (see “Replacing the Left Side-Panel“ on page
8.
11
).
Connect your computer and devices to electrical outlets and then turn
9.
them on.