Dell Alienware Aurora Ryzen Edition R14 Service Manual - Page 55
Processor, Removing the processor
View all Dell Alienware Aurora Ryzen Edition R14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
3. Align the screw holes on the processor cooler with the screw holes on the system board. 4. In sequential order, tighten the four captive screws that secure the processor cooler to the system board. 5. Connect the processor-cooling assembly cables to the system board. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. Processor Removing the processor Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 3. Remove the processor liquid-cooling assembly or processor fan and heat-sink assembly, as applicable. About this task The following images indicate the location of the processor and provide a visual representation of the removal procedure. Steps 1. Press the release lever down and then push it away from the processor to release it from the tab. 2. Extend the release lever completely. 3. Lift the processor off the processor socket. Installing the processor Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. 55