Dell Alienware x16 R1 Service Manual - Page 25
Rear-I/O cover, Removing the rear I/O-cover
View all Dell Alienware x16 R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Steps 1. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Main Antenna-cable color Silkscreen marking White MAIN △ (white triangle) Auxiliary Black AUX ▲ (black triangle) 2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot. 3. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the palm-rest and keyboard assembly. 5. Align the screw hole on the wireless card thermal shield with the screw hole on the palm-rest and keyboard assembly. 6. Replace the two screws (M2x4) that secures the wireless card thermal shield to the wireless card and palm-rest and keyboard assembly. NOTE: The thermal shield is applicable for computers shipped with certain configurations only. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Rear-I/O cover Removing the rear I/O-cover Prerequisites 1. Follow the procedure in Before working inside your computer. 25