Dell Alienware x16 R1 Service Manual - Page 82
Installing the palm-rest and keyboard assembly, Prerequisites, Steps, Next steps
![]() |
View all Dell Alienware x16 R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Installing the palm-rest and keyboard assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation process. Steps To install the palm-rest and keyboard assembly, perform the post-requisites. NOTE: The replacement palm-rest and keyboard assembly will be shipped with speakers. Install the speakers onto the palm-rest and keyboard assembly. For removal and installation procedures, see Removing the speakers and Installing the speakers. Next steps 1. Install the power button. 2. Install the I/O board. 3. Follow the procedure from step 5 to step 22 in Replacing the system board. NOTE: The system board can be removed and installed along with the heat sink. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system board and heat sink. 4. Install the keyboard-controller board. 5. Install the touchpad. 6. Install the speakers. 7. Install the display assembly. 8. Install the headset port. 9. Install the power-adapter port. 10. Install the rear I/O-cover. 11. Install the graphics-card fan. 12. Install the processor fan. 13. Install the solid-state drive bracket. 14. Install the 2230 solid-state drive or 2280 solid-state drive, as applicable. 15. Install the wireless card. 16. Install the battery. 17. Install the base cover. 82
![](/manual_guide/products/dell-alienware-x16-r1-service-manual-c915f11/82.png)