Dell B2375dnf Dell Mono MFP User's Guide - Page 329
Condition, Possible cause, Suggested solutions, Paper, Basic, The printer cable
View all Dell B2375dnf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
Condition Possible cause Suggested solutions The printer selects print materials from the wrong paper source. The paper source selection in the printer properties may be incorrect. For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. See "Paper Tab". A print job is extremely slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings. The maximum print speed of your printer is up to 35 PPM for Letter-sized paper. Half the page is blank. The page Change the page orientation in your orientation setting application. See "Basic Tab". may be incorrect. The paper size and Ensure that the paper size in the printer driver the paper size settings matches the paper in the tray. settings do not match. The printer prints, but the text is wrong, garbled, or incomplete. The printer cable is loose or defective. Disconnect the printer cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the printer to another computer and try a print job that you know works. Finally, try a new printer cable. The wrong printer Check the application's printer selection menu driver was to ensure that your printer is selected. selected. The software application is malfunctioning. Try printing a job from another application. The operating system is malfunctioning. Exit Windows and reboot the computer. Power the printer off and then back on again. - 328