Dell Brocade 1020 Brocade Adapters Troubleshooting Guide - Page 151
HCM and Installer Message Reference
View all Dell Brocade 1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
HCM and Installer Message Reference Appendix B This appendix provides details on messages that display during operation of the Host Connectivity Manager (HCM) and Brocade Adapter Software Installer program. The following tables in this appendix provide reasons why these messages display and actions that you should take to resolve any problems associated with the messages: • Table 14 provides details on messages that display during operation of the Host Connectivity Manager (HCM). Causes for each message and actions that you should perform are provided. • Table 15 on page 137 provides details on messages that display during operation of the Brocade Adapter Software Installer program. Causes for each message and actions that you should perform are provided. TABLE 14 Message Host Connectivity Manager messages Cause Corrective Action or Notes A maximum of eight ports are allowed in a team. Occurs when the user tries to create a team with more than eight ports. Create a team with eight or fewer ports. A maximum of three IP addresses are allowed. Add Team failed. Occurs when more than three IP addresses are entered in the Syslog Server Configuration dialog box. Occurs when addition of team failed due to runtime error. Configure three or less IP addresses. • Refer to the runtime reason. • Refer to HCM logs. • Verify if the team was already added. Add Team failed. Given adapter is part of another Team or VLANS exist. Occurs when the user tries to create a team using an adapter for which are VLANs configured. Do not create team when VLANs are configured. After driver file upload, older agent is stopped.\nDriver update is started. Older Agent stops after the driver upload. Information message. Add Team failed due to an unexpected error. Adding a team failed due to an unexpected error. Determine why the error happens when adding a team. All pending test(s) will be stopped. Started test(s) will continue to run until they are finished. Do you really want to close the window? Occurs when the user stops a diagnostics test before it finishes. Do not stop the test until it finishes. Brocade Adapters Troubleshooting Guide 127 53-1002145-01