Dell Brocade 825 Brocade Adapters Installation and Reference Manual - Page 134

3 Confirming driver package installation Confirming driver installation with Solaris tools Verify if the driver packages installed successfully using the following commands: NOTE Brocade 804 and 1007 adapters are not supported on Solaris systems, so commands in this section do not apply to these adapters. • These commands display information about loaded kernel modules. modinfo|grep bfa modinfo|grep bna If the storage driver package is installed, bfa Brocade Fibre Channel Adapter Driver should display. If the network driver package is installed, bna Brocade Fibre Channel Adapter Driver should display. • These commands check for and lists the installed driver package files. pkgchk -nv bfa pkgchk -nv bna • This command displays all available information about software packages or sets that are installed on the system. pkginfo -l For example, if the storage driver package is installed, bfa_pkg should display with a "complete" install status in the list of installed packages. PKGINST: bfa NAME: Brocade Fibre Channel Adapter Driver CATEGORY: system ARCH: sparc&i386 VERSION: alpha_bld31_20080502_1205 BASEDIR: / VENDOR: Brocade DESC: 32 bit & 64 bit Device driver for Brocade Fibre Channel adapters PSTAMP: 20080115150824 INSTDATE: May 02 2008 18:22 HOTLINE: Please contact your local service provider STATUS: completely installed VMware Verify if the adapter driver installed successfully using the following commands: esxcli software vib list | grep bfa 106 Brocade Adapters Installation and Reference Manual 53-1002144-01