Dell Chromebook 3110 2-in-1 Service Manual - Page 50
Display cable, Removing the display cable
View all Dell Chromebook 3110 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
NOTE: The display hinges should be at an angle of 0 degrees while the hinge caps should be at an angle of 90 degrees (or of the position of a closed laptop). NOTE: Ensure that the display hinges are rotated only to the unlock position, the hinge caps do not rotate until the display hinges are in the unlock position. Next steps 1. Install the display panel. 2. Install the display assembly. 3. Install the base cover. 4. Follow the procedure in After working inside your computer. Display cable Removing the display cable Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the display assembly. 4. Remove the display panel. About this task The following image indicates the location of the display cable and provides a visual representation of the removal procedure. 50 Removing and installing components