Dell Force10 E600i Quick Start Guide - Page 39
Installing the Software, Navigating CLI Modes, Console Access, RPM Ports and Cables
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2 Installing the Software Navigating CLI Modes The FTOS prompt changes to indicate the CLI mode. You must move linearly through the command modes, with the exception of the end command which takes you directly to EXEC Privilege mode; the exit command moves you up one command mode level. Console Access RPM Ports and Cables There are three ports on the RPM: the Console port, the Auxiliary port, and the 10/100 Ethernet port. This chapter includes information to connect to the system using the console port. For information about connecting with the other ports, refer to your system's Installation Guide. Connecting the Console NOTE: Before starting this procedure, be sure you have a terminal emulation program already installed on your PC. Step Task 1 Install an RJ-45 copper cable into the console port. Use a rollover cable to connect the S4810 console port to a terminal server. 2 Connect the other end of the cable to the DTE terminal server. Installing the Software 37