Dell Force10 S60-44T Expansion Modules for Dell™ PowerConnect - Page 13
Dell PowerConnect 62xx Series 6224, 6224P, 6224F, 6248, 6248P
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Dell PowerConnect 62xx Series (6224, 6224P, 6224F, 6248, 6248P) There are five different switch models in the Dell PowerConnect 62xx series, each with two bays for expansion modules. The rear view of the switch looks similar to the one shown in Figure 9. The yellow outlines show the two bays on the left end of the switch. Figure 9. Dell PowerConnect 62xx Series Switch (1G Ethernet) and Available Modules PowerConnect 6224, 6224P, 6224F, 6248, and 6248P support the same expansion modules as the PowerConnect M6220 modular switch. The Stacking module only installs into Bay 1 (left bay when viewing from the back). The 10GBase-T module only installs into Bay 2 (right bay when viewing from the back). Both the Stacking module and 10GE CX4 module can be configured to either role (Ethernet or Stacking). By default, each module functions according to its module ID. Upon changing the role of a module, a reboot is required for the change to take effect. Consult the 62xx Command Line Interface Guide (http://support.dell.com/support/edocs/network/PC62xx/en/index.htm) for instructions on how to change roles. 13 Expansion Modules for Dell™ PowerConnect™ and Dell Force10 Switches