Dell GX620 User Guide - Page 247

System Setup Options NOTE: Depending on your computer and installed devices, the items listed in this section may or may not appear. System System Info CPU Info Memory Info Date/Time Boot Sequence Drives Diskette Drive Drive 0 through Drive n Module Bay Drive Controller Error Reporting Lists the computer name, BIOS version, and service tag. Identifies whether the computer's processor supports Hyper-Threading and identifies the CPU speed, bus speed, clock speed, and L2 cache. Indicates amount of installed memory, computer memory speed, amount of video memory, size of the display cache, and channel mode (dual or single). Displays current date and time settings. The computer attempts to boot from the sequence of devices specified in this list. This option enables or disables the floppy drive. The options are Off, Internal, USB, and Read Only. Identifies and enables and disables the drives attached to the SATA or IDE connectors on the system board and lists the capacities for the hard drives. NOTE: These options appear as Drive 0 through Drive 3 for the desktop, mini tower, and small form computers and Drive 0 though Drive 5 for the ultra small form factor computer. Enables or disables devices in the module bay. The options are On or Off. The default setting is On. NOTE: The USB Controller and Diskette Drive setup option affect operation of the optional floppy drive in the module bay. NOTE: This option is only available for the ultra small form factor computer. Configures the serial ATA controller's operating mode. Normal enables the serial ATA controller to operate in its serial ATA native mode only. Compatible enables the serial ATA controller to operate in serial/parallel ATA combination mode. This setting determines whether hard drive errors are reported or not during system setup. Advanced Features 247