Dell Inspiron 13 5379 2-in-1 Inspiron 13 5000 2-in-1 Service Manual - Page 59
Removing the I/O board, Prerequisites, Procedure, the instructions
View all Dell Inspiron 13 5379 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the wireless card. Procedure 1 Peel off the tape that secures the I/O-board cable to the I/O board. 2 Disconnect the I/O-board cable from the I/O board. 3 Peel off the tape that secures the power and volume-buttons board-cable to the palm-rest assembly. 4 Disconnect the power and volume-buttons board-cable from the I/O board. 5 Disconnect the coin-cell battery-cable from the I/O board. 6 Remove the two screws (M2x3.5) that secure the I/O board to the palm-rest assembly. 59