Dell Inspiron 13 5379 2-in-1 Inspiron 13 5000 2-in-1 Service Manual - Page 61
Replacing the I/O board, Procedure, Post-requisites
![]() |
View all Dell Inspiron 13 5379 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Place the I/O board on the palm-rest assembly. 2 Align the screw hole on the I/O board with the screw hole on the palm-rest assembly. 3 Replace the two screws (M2x3.5) that secure the I/O board to the palm-rest assembly. 4 Connect the power and volume-buttons board-cable and coin-cell battery-cable to the I/O board. 5 Connect the I/O-board cable to the I/O board. 6 Adhere the tape that secures the power and volume-buttons board-cable to the palm-rest assembly. 7 Adhere the tape that secures the I/O-board cable to the I/O board. Post-requisites 1 Replace the wireless card. 2 Replace the battery. 3 Replace the base cover. 61
![](/manual_guide/products/dell-inspiron-13-5379-2in1-inspiron-13-5000-2in1-service-manual-9284711/61.png)