Dell Inspiron 13 7000 2-in-1 Series Inspiron 13 7359 Service Manual - Page 58
Peel off the adhesive tape on the Windows-button board connector
View all Dell Inspiron 13 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3 Peel off the adhesive tape on the Windows-button board connector and disconnect the Windows-button board cable from the system board. 1 screws (2) 2 display-cable bracket 3 display cable 4 windows-button board cable 5 adhesive tape 4 Using the pull tab disconnect the hard-drive cable from the system board. 5 Release the latches and disconnect the keyboard cable from the system board. 6 Open the latches and disconnect the keyboard-backlight cable and the touch-pad cable from the system board. 58
3
Peel off the adhesive tape on the Windows-button board connector and
disconnect the Windows-button board cable from the system board.
1
screws (2)
2
display-cable bracket
3
display cable
4
windows-button board
cable
5
adhesive tape
4
Using the pull tab disconnect the hard-drive cable from the system
board.
5
Release the latches and disconnect the keyboard cable from the system
board.
6
Open the latches and disconnect the keyboard-backlight cable and the
touch-pad cable from the system board.
58