Dell Inspiron 13 7000 2-in-1 Series Inspiron 13 7359 Service Manual - Page 88
Replacing the Windows-button board, Procedure, Post-requisites
View all Dell Inspiron 13 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Replacing the Windowsbutton board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the Windows-button board cable into the connector on the Windows-button board and press down the latch to secure the cable. 2 Turn the Windows-button board and align the screw hole on the Windows-button board with the screw hole on the display bezel. 3 Replace the screw that secures the Windows-button board to the display bezel. 4 Turn the display-panel assembly over. Post-requisites 1 Replace the display back-cover and antenna assembly . 2 Replace the display assembly. 3 Replace the battery. 4 Replace the base cover. 88