Dell Inspiron 13 7000 2-in-1 Series Inspiron 13 7359 Service Manual - Page 89
Removing the display cable, Prerequisites, Procedure
View all Dell Inspiron 13 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Removing the display cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the display assembly. 4 Remove the display back-cover and antenna assembly. 5 Remove the camera. Procedure 1 Peel off the adhesive tape and lift the latch to disconnect the display cable from the display panel. 2 Disconnect the Windows-button board cable. 3 Peel off the adhesive tape, lift the connector latch to disconnect the touch-screen board cable from the touch-screen board. 4 Remove the camera cable from the routing guides on the display bezel. 5 Lift the connector latch and disconnect the display cable from the touch board. 6 Note the display cable routing and remove the display cable from the routing guides on the display bezel. 89