Dell Inspiron 13 7368 2-in-1 Inspiron 13 7000 series 2-in-1 Service Manual - Page 66
Replacing the touch pad, Procedure, Post-requisites
View all Dell Inspiron 13 7368 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Replacing the touch pad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Place the touch pad on the palm-rest assembly. 2 Align the screw holes on the touch pad with the screw holes on the palm-rest assembly. 3 Replace the screws that secure the touch pad to the palm-rest assembly. 4 Align the screw holes on the touch-pad bracket with the screw holes on the palm-rest assembly. 5 Replace the screws that secure the touch-pad bracket to the palm-rest assembly. 6 Adhere the pieces of tape that secure the touch pad to the palm-rest assembly. 7 Slide both ends of the touch-pad cable into their respective connectors on the touch pad and keyboard daughter-board and close the latches to secure the cable. 8 Slide the keyboard daughter-board cable into their respective connectors on the system board and keyboard daughter-board and close the latches to secure the cable. Post-requisites 1 Replace the status-light board. 2 Replace the battery. 3 Replace the base cover. 66