Dell Inspiron 14 3473 Inspiron 14 3000 Service Manual - Page 32
Close the display, and turn the computer over.
View all Dell Inspiron 14 3473 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2 Place the base cover on the palm-rest assembly and route the optical-drive cable through the slot on the palm-rest assembly. 3 Slide the tabs on the base cover into the slots on the palm-rest assembly, and snap the base cover into place. 4 Slide the optical-drive cable into the connector on the system board and press down the latch to secure the cable. 5 Replace the three screws (M2x5) that secure the computer base to the palmrest assembly. 6 Close the display, and turn the computer over. 7 Replace the three screws (M2x2) that secure the base cover to the palm-rest assembly. 8 Replace the two screws (M2x5) that secure the base cover to the palm-rest assembly. 9 Replace the eight screws (M2.5x8) that secure the base cover to the palm-rest assembly. 32