Dell Inspiron 15 3537 Inspiron 15 3537 Owner's Manual - Page 14

Replacing the Memory Module(s), Procedure, Postrequisites

Page 14 highlights

Replacing the Memory Module(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the notch on the memory module with the tab on the memory-module connector. 2 Slide the memory module into the connector at a 45-degree angle and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. 3 Slide the tabs on the memory-module cover into the slots on the computer base and snap the memory-module cover into place. 4 Tighten the captive screws that secure the memory-module cover to the computer base. Postrequisites Replace the battery. See "Replacing the Battery" on page 11. 14 | Replacing the Memory Module(s)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

14
|
Replacing the Memory Module(s)
Replacing the Memory Module(s)
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the notch on the memory module with the tab on the
memory-module connector.
2
Slide the memory module into the connector at a 45-degree angle and press the
memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
3
Slide the tabs on the memory-module cover into the slots on the computer base
and snap the memory-module cover into place.
4
Tighten the captive screws that secure the memory-module cover to
the computer base.
Postrequisites
Replace the battery. See "Replacing the Battery" on page 11.