Dell Inspiron 15 7000 2-in-1 Series Inspiron 15 7568 Service Manual - Page 58
Replacing the power and volume-buttons board, Procedure, Post-requisites
View all Dell Inspiron 15 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the power and volume-buttons board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the power and volume-buttons board into the slot on the computer base and snap the power and volume-buttons board into place. 2 Adhere the tape that secures the power and volume-buttons board to the computer base. 3 Route the power and volume-buttons board cable through the routing guide on the computer base. 4 Connect the power and volume-buttons board cable to the I/O board. 5 Adhere the tape that secures the power and volume-buttons board cable to the computer base. Post-requisites 1 Follow the procedure from step 4 to step 7 in "Replacing the hard drive". 2 Replace the battery. 3 Replace the base cover. 58