Dell Inspiron 15 7000 2-in-1 Series Inspiron 15 7568 Service Manual - Page 59
Removing the I/O board, Prerequisites, Procedure
View all Dell Inspiron 15 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Follow the procedure from step 1 to step 4 in "Removing the hard drive". 4 Remove the wireless card. 5 Remove the coin-cell battery. Procedure 1 Using the pull tab, disconnect the I/O-board cable from the I/O board. 2 Disconnect the power and volume-buttons board cable from the I/O board. 3 Remove the screw that secures the I/O board to the computer base. 59