Dell Inspiron 15 7000 2-in-1 Series Inspiron 15 7568 Service Manual - Page 62
Removing the display assembly, Prerequisites, Procedure
View all Dell Inspiron 15 7000 2-in-1 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. Procedure 1 Disconnect the antenna cables from the wireless card. 2 Peel off the tape that secures the antenna cables to the display hinge. 3 Remove the antenna cables from the routing guides on the computer base. 4 Remove the screws that secure the display-cable bracket to the system board. 5 Lift the display-cable bracket off the system board. 6 Using the pull tab, disconnect the display cable from the system board. 7 Peel off the tape that secures the Windows-button board cable to the system board. 8 Lift the latch and disconnect the Windows-button board cable from the system board. 62