Dell Inspiron 16 Plus 7620 Inspiron 16 Plus 7620 Service Manual - NVIDIA GeFor - Page 17
Memory module, Removing the memory module
View all Dell Inspiron 16 Plus 7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Ensure that the battery cable has been connected to the system board. 2. Place and snap the base cover into place on the palm-rest and keyboard assembly. 3. Tighten the two captive screws on the base cover that secure the base cover to the palm-rest and keyboard assembly. 4. Replace the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. Next steps 1. Follow the procedure in After working inside your computer. Memory module Removing the memory module Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the memory module and provides a visual representation of the removal procedure. Removing and installing components 17