Dell Inspiron 16 Plus 7620 Inspiron 16 Plus 7620 Service Manual - NVIDIA GeFor - Page 43

Steps, Next steps, Close the latch and replace the clear adhesive tape.

Get Dell Inspiron 16 Plus 7620 PDF manuals and user guides View all Dell Inspiron 16 Plus 7620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Steps 1. Align the screw holes on the I/O board with the screw holes on the system board and palm-rest and keyboard assembly. 2. Align the ports on the I/O board with the slots on the palm-rest and keyboard assembly. 3. Place the I/O board on the palm-rest and keyboard assembly. 4. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 5. Connect the I/O-board cable to the I/O board. 6. Close the latch and replace the clear adhesive tape. 7. Connect the optional fingerprint-reader cable to the I/O board and close the latch to secure the cable. Next steps 1. Install the heat sink 2. Install the left fan 3. Install the base cover. 4. Follow the procedure in After working inside your computer. Removing and installing components 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Steps
1.
Align the screw holes on the I/O board with the screw holes on the system board and palm-rest and keyboard assembly.
2.
Align the ports on the I/O board with the slots on the palm-rest and keyboard assembly.
3.
Place the I/O board on the palm-rest and keyboard assembly.
4.
Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
5.
Connect the I/O-board cable to the I/O board.
6.
Close the latch and replace the clear adhesive tape.
7.
Connect the optional fingerprint-reader cable to the I/O board and close the latch to secure the cable.
Next steps
1.
Install the
heat sink
2.
Install the
left fan
3.
Install the
base cover
.
4.
Follow the procedure in
After working inside your computer
.
Removing and installing components
43