Dell Inspiron 16 Plus 7620 Inspiron 16 Plus 7620 Service Manual - NVIDIA GeFor - Page 35
Heat sink, Removing the heat sink
View all Dell Inspiron 16 Plus 7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Steps 1. Align the screw holes of the right fan with the screw holes on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x5) that secure the right fan to the palm-rest and keyboard assembly. 3. Connect the right-fan cable to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Heat sink Removing the heat sink Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. About this task CAUTION: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure. Removing and installing components 35