Dell Inspiron 20 3045 Owners Manual - Page 32

Replacing the Memory Module(s), Procedure, Postrequisites

Get Dell Inspiron 20 3045 PDF manuals and user guides View all Dell Inspiron 20 3045 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Replacing the Memory Module(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the notch on the memory module with the tab on the memorymodule connector. 2 Insert the memory module into the memory-module connector, and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. NOTE: Use the memory module socket marked as DIMM2 if only one memory module is in use. 1 notch 2 tab 3 Slide the tabs on the memory-module shield under the tabs on the system-board shield until the memory-module shield is fully secured. Postrequisites 1 Replace the back cover. 2 Replace the stand assembly. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Replacing the Memory
Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the notch on the memory module with the tab on the memory-
module connector.
2
Insert the memory module into the memory-module connector, and
press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module
and reinstall it.
NOTE:
Use the memory module socket marked as DIMM2 if only
one memory module is in use.
1
notch
2
tab
3
Slide the tabs on the memory-module shield under the tabs on the
system-board shield until the memory-module shield is fully secured.
Postrequisites
1
Replace the
back cover
.
2
Replace the
stand assembly
.
32