Dell Inspiron 20 3045 Owners Manual - Page 76
Replacing the Display Panel, Procedure, Postrequisites
View all Dell Inspiron 20 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the Display Panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the display-panel brackets with the screw holes on the display panel. 2 Replace the screws that secure the display-panel brackets to the display panel. 3 Align the screw holes on the display panel with the screw holes on the display bezel and place the display panel on the display bezel. NOTE: Make sure that no cables are under the display panel. 4 Connect the display cable to the connector on the display panel and secure the cable with the tape. 5 Align the screw holes on the display-panel base with the screw holes on the display bezel and snap the display-panel base into place. 6 Replace the screws that secure the display-panel base to the display bezel. 7 Connect the converter-board cable to the connector on the display panel. 8 Connect the control-buttons board cable to the control-buttons board. 9 Route the speaker cable through the routing guides on the display-panel base and connect the speaker cable to the system board. 10 Route the camera cable through the routing guides and connect the camera cable to the system board. 11 Slide the display cable into the system-board connector and press down on the connector latch to secure the cable. Postrequisites 1 Replace the speaker cover. 2 Replace the system-board shield. 76