Dell Inspiron 20 3045 Owners Manual - Page 61
Removing the System Board, Prerequisites
View all Dell Inspiron 20 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Removing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the system setup after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect them correctly after you replace the system board. Prerequisites 1 Remove the stand assembly. 2 Remove the back cover. 3 Remove the VESA-mount bracket. 4 Remove the memory module(s). 5 Remove the system-board shield. 6 Remove the wireless card. 7 Remove the heat sink. 61