Dell Inspiron 24 5421 All-in-One Owners Manual - Page 90
Installing the microphones
View all Dell Inspiron 24 5421 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
12. Remove the system board. About this task The following image indicates the location of the microphones and provides a visual representation of the removal procedure. Steps 1. Remove the four screws (M2X3.5) that secure the microphone module to the display-assembly base. 2. Peel the tape that secures the microphone cable to the display-assembly base. 3. Remove the microphone cable from the routing guides on the display-assembly base. 4. Lift the microphone module off the display-assembly base. Installing the microphones CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the microphones and provides a visual representation of the installation procedure. 90 Removing and installing Field Replaceable Units (FRUs)