Dell Inspiron 27 7775 Inspiron 27 7000 Service Manual - Page 105
Removing the system board, Prerequisites
![]() |
View all Dell Inspiron 27 7775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Identifier GUID-B54497E8-5AD5-4FF9-AD4A-F32FDBEDE1E8 Status Released Removing the system board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect the cables correctly after you replace the system board. Identifier GUID-FBBF0EEB-05FB-46DE-8B76-119C4EF76D05 Status Released Prerequisites 1 Remove the back cover. 2 Remove the system-board shield. 3 Remove the memory modules. 4 Remove the solid-state drive. 5 Remove the wireless card. 6 Remove the heat sink. 7 Remove the processor. 105
![](/manual_guide/products/dell-inspiron-27-7775-inspiron-27-7000-service-manual-2ea169d/105.png)