Dell Inspiron 27 7775 Inspiron 27 7000 Service Manual - Page 89
Replacing the heat sink, Procedure, Post-requisites
![]() |
View all Dell Inspiron 27 7775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Identifier GUID-69332260-F504-4C70-A535-1E11124CC185 Status Released Replacing the heat sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: The original thermal grease can be reused if the original system board and heat sink are reinstalled together. If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. Identifier GUID-A463AB2B-EF38-4591-8266-AF011E78DF23 Status Released Procedure 1 Align the captive screws on the heat sink with the screw holes on the system board. 2 In sequential order (indicated on the heat sink), tighten the captive screws that secure the heat sink to the system board. 3 Replace the screw (M3x5) that secures the heat sink to the middle frame. Identifier GUID-A1EEE406-0EEB-4DD1-B70B-97B0904A2B57 Status Released Post-requisites 1 Replace the system-board shield. 89
![](/manual_guide/products/dell-inspiron-27-7775-inspiron-27-7000-service-manual-2ea169d/89.png)