Dell Inspiron 27 7775 Inspiron 27 7000 Service Manual - Page 53
Replacing the media-card reader, Procedure, Post-requisites
![]() |
View all Dell Inspiron 27 7775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Identifier GUID-5B4BA881-7BC3-40C6-8E48-8B01E3134AE5 Status Released Replacing the media-card reader WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Identifier GUID-5AD24448-7899-480B-A992-9CA22F8AE710 Status Released Procedure 1 Align the screw holes on the media-card reader to the screw holes on the side I/O-board bracket. 2 Replace the two screws (M3x5) that secure the media-card reader to the side I/O-board bracket. 3 Using the alignment post, place the side-I/O bracket on the middle frame. 4 Align the screw holes on the side I/O-board bracket to the screw holes on the middle frame. 5 Replace the two screws (M3x5) that secure the side I/O-board bracket to the middle frame. 6 Connect the side I/O-board cable (MB-SUSBC) to the side I/O-board. 7 Connect the media-card reader cable (SDRDC1) to the media-card reader. Identifier GUID-5BE3AE14-06F3-4D93-8158-E706F91E6665 Status Released Post-requisites 1 Replace the inner frame. 53
![](/manual_guide/products/dell-inspiron-27-7775-inspiron-27-7000-service-manual-2ea169d/53.png)