Dell Inspiron 300m Service Manual - Page 24

Keyboard Tray

Get Dell Inspiron 300m PDF manuals and user guides View all Dell Inspiron 300m manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Back to Contents Page Keyboard Tray Dell™ Inspiron™ 300m Service Manual Removing the Keyboard Tray Replacing the Keyboard Tray Removing the Keyboard Tray CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Owner's Manual. NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Before You Begin" before performing the following procedure. 1. Remove the battery. 2. Remove the keyboard. 3. Remove the palm rest. 4. Remove the hinge covers. 5. Remove the display assembly. 6. Remove the five M2 x 4-mm screws that secure the keyboard tray to the system board. NOTE: Each keyboard tray screw has an arrow beside it. 1 keyboard tray 2 M2 x 4-mm screws (5) 7. Lift the keyboard tray up and slip out the antenna cables before lifting the tray out of the bottom case. Replacing the Keyboard Tray

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Back to Contents Page
Keyboard Tray
Dell™ Inspiron™ 300m Service Manual
Removing the Keyboard Tray
Replacing the Keyboard Tray
Removing the Keyboard Tray
1.
Remove the
battery
.
2.
Remove the
keyboard
.
3.
Remove the
palm rest
.
4.
Remove the
hinge covers
.
5.
Remove the
display assembly
.
6.
Remove the five M2 x 4-mm screws that secure the keyboard tray to the system board.
7.
Lift the keyboard tray up and slip out the antenna cables before lifting the tray out of the bottom case.
Replacing the Keyboard Tray
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Owner's Manual.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before You Begin
" before performing the following procedure.
NOTE:
Each keyboard tray screw has an arrow beside it.
1
keyboard tray
2
M2 x 4-mm screws (5)