Dell Inspiron 3059 AIO Inspiron 20 3059 Service Manual - Page 52

Replacing the camera, Procedure, Post-requisites

Get Dell Inspiron 3059 AIO PDF manuals and user guides View all Dell Inspiron 3059 AIO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Replacing the camera WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Adhere the camera to the camera frame. 2 Connect the camera cable to the camera module. 3 Press the camera frame down into the slot on the display bezel until it snaps into place. 4 Route the camera cable and antenna cable through the routing guides on the display-assembly base. 5 Connect the microphone and camera cable to the system board. Post-requisites 1 Replace the system-board shield. 2 Replace the back cover. 3 Follow the procedure in step 4 in "Replacing the optical drive". 4 Replace the stand. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Adhere the camera to the camera frame.
2
Connect the camera cable to the camera module.
3
Press the camera frame down into the slot on the display bezel until it
snaps into place.
4
Route the camera cable and antenna cable through the routing guides on
the display-assembly base.
5
Connect the microphone and camera cable to the system board.
Post-requisites
1
Replace the
system-board shield
.
2
Replace the
back cover
.
3
Follow the procedure in step 4 in “
Replacing the optical drive
”.
4
Replace the
stand
.
52