Dell Inspiron 3059 AIO Inspiron 20 3059 Service Manual - Page 82
Procedure, Clearing CMOS Settings
View all Dell Inspiron 3059 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Procedure 1 Locate the password jumper (PSWD) on the system board. NOTE: For more information on the location of the jumper, see "System-board components". 2 Remove the jumper plug from the password jumper-pins. 3 Wait for 5 seconds and then replace the jumper plug in its original location. 1 jumper plug 2 password jumper-pins Clearing CMOS Settings WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Locate the CMOS jumper (CMCL R2) on the system board. NOTE: For more information on the location of the jumper, see "System-board components". 2 Remove the jumper plug from the password jumper-pins and connect it to the CMOS jumper-pins. 82