Dell Inspiron 3655 desktop Inspiron 3655 Service Manual - Page 41
Replacing the optical drive, Procedure, Post-requisites
View all Dell Inspiron 3655 desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Replacing the optical drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align and snap the optical-drive bezel to the optical drive. 2 Align the screw holes on the optical-drive bracket with the screw holes on the optical drive. 3 Replace the screws that secure the optical-drive bracket to the optical drive. 4 Slide the optical-drive module into the optical-drive bay through the front of the chassis. 5 Replace the screw that secures the optical-drive module to the chassis. 6 Open the side-chassis. 7 Connect the optical-drive cable and the power cable to the optical drive. 8 Connect the hard-drive cable and the power cable to the hard drive. 9 Close the side-chassis. Post-requisites 1 Replace the front bezel. 2 Replace the computer cover. 41