Dell Inspiron 3655 desktop Inspiron 3655 Service Manual - Page 70
Removing the system board, Prerequisites, Procedure
View all Dell Inspiron 3655 desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removing the system board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the desired changes again after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect the cables correctly after you replace the system board. Prerequisites 1 Remove the computer cover. 2 Remove the front bezel. 3 Remove the wireless card. 4 Remove the heat sink. 5 Remove the processor fan. 6 Remove the memory modules. Procedure 1 Disconnect all the cables connected to the system board. 70