Dell Inspiron 3847 Desktop Inspiron 3847 Users Guide - Page 15

Replacing the Memory Module(s), Procedure, Postrequisites

Page 15 highlights

Replacing the Memory Module(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Press out the securing clip at each end of the memory-module connector. 2 Align the notch on the memory module with the tab on the memory-module connector. 4 23 1 1 cutouts (2) 3 notch 2 tab 4 memory module 3 Insert the memory module into the memory-module connector, and press the memory module down until it snaps into position and the securing clips lock in place. Postrequisites Replace the computer cover. See "Replacing the Computer Cover" on page 13. Replacing the Memory Module(s) | 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

Replacing the Memory Module(s)
|
15
Replacing the Memory Module(s)
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Press out the securing clip at each end of the memory-module connector.
2
Align the notch on the memory module with the tab on the memory-module
connector.
3
Insert the memory module into the memory-module connector, and press the
memory module down until it snaps into position and the securing clips lock in place.
Postrequisites
Replace the computer cover. See "Replacing the Computer Cover" on page 13.
1
cutouts (2)
2
tab
3
notch
4
memory module
2
3
1
4