Dell Inspiron 5391 Service Manual - Page 20
Heat sink, Removing the heat sink
View all Dell Inspiron 5391 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive slot on the system board. 2. Slide the solid-state bracket on to the solid-state drive on the system board. 3. Replace the screw (M2x2.5) that secures the solid-state drive to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Heat sink Removing the heat sink Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of the heat sink and provides a visual representation of the removal procedure. 20 Removing and installing components