Dell Inspiron Zino HD 410 Service Manual - Page 10
Graphics Card
View all Dell Inspiron Zino HD 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Back to Contents Page Graphics Card Dell™ Inspiron™ 410 Service Manual Removing the Graphics Card Replacing the Graphics Card WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Graphics Card 1. Follow the procedures in Before You Begin. 2. Remove the bottom cover (see Removing the Bottom Cover). 3. Remove the two screws that secure the graphics card to the system board. 4. Remove the graphics card from the system board connector. 1 graphics card 2 screws (2) Replacing the Graphics Card 1. Follow the procedures in Before You Begin. 2. Align the notch on the graphics card with the tab in the system-board connector. 3. Insert the graphics card at a 45-degree angle into the system board connector. 4. Press the other end of the graphics card down and replace the two screws that secure the graphics card to the system-board connector. 5. Replace the bottom cover (see Replacing the Bottom Cover). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.