Dell LTO-4-120 LTO Media Handbook - Page 17

Table 9. Characteristics of Expired LTO Cleaning Tape in Various Drives (continued) Drive Type Cleaning with a Good Tape Cleaning with an Expired Tape Dell PowerVault No seven segment display 110T LTO-2 indicator. • Activity light blinks green. • Ejects tape shorty after. • Pre firmware 53Y3: No seven segment display indicator. Activity light blinks green but ejects tape shortly after inserting. • Firmware 53Y3 and newer: - Seven segment display shows 7 - Activity light blinks amber - Ejects tape shortly after inserting. When tape is completely removed, all light indicators turn off. Dell PowerVault 110T LTO-2-L (Certance) • Power light on solid green. • Power light on solid green. • Activity light on solid • Activity light on solid green. green. • Status light blinks amber. • Status light on solid amber. • Ejects tape shortly after inserting. • Ejects tape when complete. Dell PowerVault 110T LTO-2-L (Tandberg) • Press and hold the Eject button for 6 seconds. The drive enters the service mode indicated by all LEDs flashing slowly. • Press Eject twice. The Activity LED flashes fast. • Ejects tape shorty after. • Cleaning light turns on. • Activity light flashes. • Fault light flashes. • Cartridge hold in the drive When pressing Eject button, the cartridge is ejected and the Cleaning light stays on. Dell PowerVault No seven segment display 110T LTO-3 indicator. • Activity light blinks green • Ejects tape shorty after. • Seven segment display shows 7. • Activity light blinks amber. • Ejects tape shortly after inserting. When tape is completely removed, all light indicators turn off. LTO Media Handbook 17