Dell LTO-4-120 LTO Media Handbook - Page 20
Resetting Your PowerVault 110T LTO Tape Drive, 110T LTO3-080
View all Dell LTO-4-120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 10. Resetting Your PowerVault 110T LTO Tape Drive (continued) Drive Type Device Reset Procedure Dell PowerVault 110T LTO3-060 (Tandberg) 1 Press and hold the Eject button for six seconds. The drive enters service mode and all the LEDs flash slowly. 2 Press Eject twice. The Activity LED flashes fast. 3 Double-click the Eject button. Dell PowerVault 110T LTO3-080 (IBM) 1 Press and hold the Eject button for more than 10 seconds. 2 Release the Eject button. 3 Press Eject again to eject tape. Dell PowerVault 110T LTO4-120 1 Press and hold the Eject button for more than 10 seconds. 2 Release the Eject button. 3 Press Eject again to eject tape. Dell PowerVault 110T LTO4- 120HH 1 Press and hold the Eject button for more than 10 seconds. 2 Release the Eject button. 3 Press Eject again to eject tape. Dell PowerVault 110T LTO5-140 1 Press and hold the Eject button for more than 10 seconds. 2 Release the Eject button. 3 Press Eject again to eject tape. NOTE: It may take up to 20 minutes for a tape cartridge to fully rewind and eject. 20 LTO Media Handbook