Dell Latitude 3160 Dell Owners Manual - Page 10

Installing the Battery, Removing the Audio Board, base cover, After Working Inside Your Computer

Get Dell Latitude 3160 PDF manuals and user guides View all Dell Latitude 3160 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

a. Remove the screws that secure the battery to the computer [1]. b. Remove the battery from the computer [2]. Installing the Battery 1. Insert the battery into its place on the computer. 2. Connect the battery cable to its connector on the system board. 3. Fix the adhesive tape to secure the battery cable. 4. Tighten the screws to secure the battery to the computer. 5. Install the base cover. 6. Follow the procedures in After Working Inside Your Computer. Removing the Audio Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery 3. Perform the following steps: a. Disconnect the audio-board cable from its connector on the system board [1]. b. Remove the screw that secures the audio board to the computer [2]. c. Remove the audio board from the computer [3]. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
a.
Remove the screws that secure the battery to the computer [1].
b.
Remove the battery from the computer [2].
Installing the Battery
1.
Insert the battery into its place on the computer.
2.
Connect the battery cable to its connector on the system board.
3.
Fix the adhesive tape to secure the battery cable.
4.
Tighten the screws to secure the battery to the computer.
5.
Install the
base cover
.
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Audio Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps:
a.
Disconnect the audio-board cable from its connector on the system board [1].
b.
Remove the screw that secures the audio board to the computer [2].
c.
Remove the audio board from the computer [3].
10